Description

Introduction:

Microboard Processing, Inc. (Microboard), located in Seymour, CT is a privately held, completely state-of-the-art Electronic Manufacturing Services (EMS) provider that has been in business for 40 years. We are relentless with our continuous improvement philosophy as well as our equipment, software and human capabilities, employing the brightest minds and the newest equipment (FUJI NXT III SMT, Automated climate-controlled inventory towers, 5D X-Rays, in-line SPI’s and AOI’s, on-site Nitrogen Generation, etc.). We are constantly pursuing global certifications to maintain Microboard at the leading edge of technology with a keen sensitivity to our environment (ISO 9001:2015, ISO 13485, AS9100D, ISO14001, CE, UL, ITAR.)

Summary:

As a Process Quality Engineer at Microboard you will be responsible for manufacturing quality on the production floor. You will monitor quality metrics, quickly identify quality issues, and address non-conformances in real-time. You will work closely with production, engineering and quality control, advising and providing support.

Essential Duties and Responsibilities: include the following. Other duties may be assigned.

• Participate in Technical and Engineering Design Reviews
• Monitor process quality and address non-conformances in real time
• Develop receiving inspection plans for PCBs and mechanical components
• Recommend production improvement opportunities based on historical quality data
• Co-chair the committee for dispositioning receiving and in-process non-conforming material
• Provide guidance to Inspection personnel
• Monitor system wide Quality trends
• Drive corrective and preventative action
• Conduct supplier audits, in-process audits, AS and ISO internal audits, and participate in customer audits
• Generate quality plans following the guidelines of the APQP process defined in various international standards
• Author and perform product and process validations
• Perform other duties as defined by management

Qualifications

• Possess a Bachelor’s degree in Engineering or related disciplines, or equivalent work experience
• Minimum of three years’ experience as a certified Process and/or Quality Engineer in a company whose business is in electronics and/or electronic assembly
• CQE designation is mandatory for a Senior QE position although Microboard will consider CQE eligible candidates for QE positions
• Certification to and/or knowledge of IPC-A-600, IPC-A-610, IPC-A-620, and J-STD-001 are highly desired
• Certification as a QMS auditor for AS9100, ISO-9000, ISO-13485, GMP are desirable
• Experienced with the creation and performance of AS9102 FAI’s
• Capable of high-level data analysis
• Ability to generate and perform FMEA’s and PFMEA’s
• Working knowledge of Configuration Management standards such as ISO100007, SAE/EIA-649, and MIL-HDBK-614 September 19, 2019 Page 2 Microboard Proprietary
• Process knowledge in printed circuit assembly and/or printed circuit boards is highly desirable
• Ability to work independently
• Desire to grow into a leadership role, over time
• Availability for national and international travel, up to 10% of the time, may be required
• Possess a Bachelor’s degree in Engineering or related disciplines, or equivalent work experience
• Minimum of three years’ experience as a certified Process and/or Quality Engineer in a company whose business is in electronics and/or electronic assembly
• CQE designation is mandatory for a Senior QE position although Microboard will consider CQE eligible candidates for QE positions
• Certification to and/or knowledge of IPC-A-600, IPC-A-610, IPC-A-620, and J-STD-001 are highly desired
• Certification as a QMS auditor for AS9100, ISO-9000, ISO-13485, GMP are desirable
• Experienced with the creation and performance of AS9102 FAI’s
• Capable of high-level data analysis
• Ability to generate and perform FMEA’s and PFMEA’s
• Working knowledge of Configuration Management standards such as ISO100007, SAE/EIA-649, and MIL-HDBK-614 September 19, 2019 Page 2 Microboard Proprietary
• Process knowledge in printed circuit assembly and/or printed circuit boards is highly desirable
• Ability to work independently
• Desire to grow into a leadership role, over time
• Availability for national and international travel, up to 10% of the time, may be required
• Possess a Bachelor’s degree in Engineering or related disciplines, or equivalent work experience
• Minimum of three years’ experience as a certified Process and/or Quality Engineer in a company whose business is in electronics and/or electronic assembly
• CQE designation is mandatory for a Senior QE position although Microboard will consider CQE eligible candidates for QE positions
• Certification to and/or knowledge of IPC-A-600, IPC-A-610, IPC-A-620, and J-STD-001 are highly desired
• Certification as a QMS auditor for AS9100, ISO-9000, ISO-13485, GMP are desirable
• Experienced with the creation and performance of AS9102 FAI’s
• Capable of high-level data analysis
• Ability to generate and perform FMEA’s and PFMEA’s
• Working knowledge of Configuration Management standards such as ISO100007, SAE/EIA-649, and MIL-HDBK-614 September 19, 2019 Page 2 Microboard Proprietary
• Process knowledge in printed circuit assembly and/or printed circuit boards is highly desirable
• Ability to work independently
• Desire to grow into a leadership role, over time
• Availability for national and international travel, up to 10% of the time, may be required
• Possess a Bachelor’s degree in Engineering or related disciplines, or equivalent work experience
• Minimum of three years’ experience as a certified Process and/or Quality Engineer in a company whose business is in electronics and/or electronic assembly
• CQE designation is mandatory for a Senior QE position although Microboard will consider CQE eligible candidates for QE positions
• Certification to and/or knowledge of IPC-A-600, IPC-A-610, IPC-A-620, and J-STD-001 are highly desired
• Certification as a QMS auditor for AS9100, ISO-9000, ISO-13485, GMP are desirable
• Experienced with the creation and performance of AS9102 FAI’s
• Capable of high-level data analysis
• Ability to generate and perform FMEA’s and PFMEA’s
• Working knowledge of Configuration Management standards such as ISO100007, SAE/EIA-649, and MIL-HDBK-614 September 19, 2019 Page 2 Microboard Proprietary
• Process knowledge in printed circuit assembly and/or printed circuit boards is highly desirable
• Ability to work independently
• Desire to grow into a leadership role, over time
• Availability for national and international travel, up to 10% of the time, may be required
• Possess a Bachelor’s degree in Engineering or related disciplines, or equivalent work experience
• Minimum of three years’ experience as a certified Process and/or Quality Engineer in a company whose business is in electronics and/or electronic assembly
• CQE designation is mandatory for a Senior QE position although Microboard will consider CQE eligible candidates for QE positions
• Certification to and/or knowledge of IPC-A-600, IPC-A-610, IPC-A-620, and J-STD-001 are highly desired
• Certification as a QMS auditor for AS9100, ISO-9000, ISO-13485, GMP are desirable
• Experienced with the creation and performance of AS9102 FAI’s
• Capable of high-level data analysis
• Ability to generate and perform FMEA’s and PFMEA’s
• Working knowledge of Configuration Management standards such as ISO100007, SAE/EIA-649, and MIL-HDBK-614 September 19, 2019 Page 2 Microboard Proprietary
• Process knowledge in printed circuit assembly and/or printed circuit boards is highly desirable
• Ability to work independently
• Desire to grow into a leadership role, over time
• Availability for national and international travel, up to 10% of the time, may be required

ID:uDnQdo